PRO CLAMP KIT (#6010)
> Price & specifications
The Pro Clamp Kit is great for production runs and wide boards. These clamps attach to the backing block of your template. They secure single or multiple pieces of wood for cutting both dovetails and pins and allow production shops to cut up to 40 drawers or boxes per hour.
The template/clamp kit assembly can be used in normal upright operating position, with your work secured vertically in a bench vice. For shorter stock and production work with drawers and boxes, you can clamp your wood to the template with the Pro Clamp Kit, then turn the entire assembly upside-down and cut the dovetails and pins on your router table. (see photo at left)
Boards being dovetailed can be ganged side by side as well as sandwiched face to face within the clamps; boards being cut for the pins can be clamped in a single layer side by side. For repetitive repositioning of stock on long runs, use stops attached to the backing block.
The Clamp Kit allows you to secure and flatten wide boards, so this is great for use in dovetailing blanket chests and large casework. Made in the USA.
Price & specifications
Keller 6010 Pro Clamp Kit $119.00
Add to cart
4 industrial toggle clamps
4 carriage bolts with nuts and washers
16 mounting screws
Instructions for assembly and use
Materials needed (not included):
2 clamping cauls (approx. 2" x 2" wooden blocks, approx. 6" longer than template, of some strong wood, such as oak, ash or maple).
Your Keller Dovetail System mounted and set up for use.